In the crystal fans machine production process, the equipment will be affected due to the internal and external factors, there will be a variety of problems and failures, in order to avoid the occurrence of these failures, users in the use of machine equipment crystal fans should pay attention to some operational considerations, The following is the first half of the considerations for the use of StarFamily's fans and hopes to help users.
1, the next paste device float ball once every four hours to clean, keep the float clean, the action when cleaning should be light, to prevent deformation of the float sensor, so as not to cause loss of control; every 24 hours in the floating ball bracket drops of edible oil drops , keep the active axis running and flexible.
2. When the crystal fan inverter is running normally, it is not allowed to turn off the circuit breaker or contactor. To stop the operation, the stop reset button on the inverter panel should be operated.
3, crystal fan production line aging, steaming box, adjust the three systems as a group of linkage, oven, cross-cutting knife, horizontal delivery of three systems for a group of linkage, when the boot should be moved respectively to the system operation key switch, when normal During operation, the first group of linkage steamers and adjustment systems are turned on or off with aging; in the second group of linkages, the cross cutters are opened or closed with the oven, and each system operation can also be stopped separately during production to facilitate overhaul. (SYM)
If you need, please feel free to contact us, 24 hours service call
1, the next paste device float ball once every four hours to clean, keep the float clean, the action when cleaning should be light, to prevent deformation of the float sensor, so as not to cause loss of control; every 24 hours in the floating ball bracket drops of edible oil drops , keep the active axis running and flexible.
2. When the crystal fan inverter is running normally, it is not allowed to turn off the circuit breaker or contactor. To stop the operation, the stop reset button on the inverter panel should be operated.
3, crystal fan production line aging, steaming box, adjust the three systems as a group of linkage, oven, cross-cutting knife, horizontal delivery of three systems for a group of linkage, when the boot should be moved respectively to the system operation key switch, when normal During operation, the first group of linkage steamers and adjustment systems are turned on or off with aging; in the second group of linkages, the cross cutters are opened or closed with the oven, and each system operation can also be stopped separately during production to facilitate overhaul. (SYM)
If you need, please feel free to contact us, 24 hours service call
Bitumen Emulsifier,Bituminous Emulsion,Slow Setting Bitumen Emulsion,Rapid Setting Bitumen Emulsion
Sichuan Tianyu Oleochemical Co., Ltd , https://www.sclthoil.com