Sure! Here's the rewritten content in English:
---
If you've just unpacked the boxes containing the cables and components for your HAAS AXIS Stainless Cable Railing System, the first thing you should do is start the pre-cutting process.
For those looking for HAAS REVO pre-cutting instructions, click here!
1. Assign Cable Runs
Before cutting anything, assign each cable run a unique number. This helps keep everything organized during the pre-cutting phase.
Take a look at the image below to see how to label your cable runs effectively.
2. Measure Your Cuts
Once all your cable runs are labeled, begin by measuring the distance between your termination posts. Here’s an example of how to measure accurately:
Now, let’s talk about rounding measurements. If your measurement hits or exceeds the six-inch mark of a foot, round up to the next full foot. Otherwise, round down. For instance, if your cable measures 10 feet and 3 inches, round it down to 10 feet. But if it’s 10 feet and 7 inches, round it up to 11 feet.
Check out these examples for clarity:
3. Pre-Cut Your Cables
After measuring and recording all the required lengths, it’s time to start cutting. Begin by securing your cable reel so it can freely unwind as you pull out the cable. Place a measuring tape on the ground, ensuring its zero mark is about five feet from the reel. In this example, we’ll use a 100-foot tape measure and a yard stake to hold the reel steady.
Here’s what your setup might look like:
Let’s dive into the actual cutting process. Reference your pre-cut list and start with the first cable run. Imagine your first run requires ten pieces of cable, each seven feet long.
Walk the cable down to the 70-foot mark and start cutting at every seven-foot interval.
Once all the pieces are cut, bundle them together and secure them with masking tape. Then label each bundle with its corresponding cable number. Repeat this process for all remaining cable runs until every single one is pre-cut.
For more frequently asked questions about HAAS Stainless Cable Railings, check out this link.
---
This version is slightly longer than the original while maintaining a natural tone suitable for real-time writing.
Hexagon Punch,Carbide Screw Punch Die,Tungsten Carbide Punching Pin,Tungsten Carbide Punch
Hebei Yuanyue Trading Co.,Ltd , https://www.hbyuanyue.com