10 tips to get furniture purchases

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

Furniture is closely related to our lives and directly affects the quality of life and physical health. Here you will be taught 10 pieces of furniture to buy tips, reminding the public to buy knowledge beforehand, it is best to reserve knowledge in advance.

1. Is the furniture material reasonable?

Different furniture, surface materials are different. Such as tables, chairs, cabinet legs, the use of hardwood, relatively strong, can bear the weight, while the internal materials can be used other materials; the thickness of the large wardrobe legs to 2.5 cm, too thick is clumsy, thin and easy to bend Deformation; kitchen and bathroom cabinets can not be made of fiberboard, but should be used with plywood, because the fiberboard will expand and damage when exposed to water; the dining table should be washable.

It was found that the wood had insect eyes and dropped, indicating that the drying was not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is nose, glare, or tears, it means that the formaldehyde content in the glue is too high and it will be harmful to the human body.

2. Is the furniture four feet flat?

Putting the furniture on the ground and shaking it, some furniture only have three legs to land. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. It should be horizontal and vertical, and the door should not sag.

3. Is the furniture structure firm?

Small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating that the quality is good; if the sound is dumb, there is a murmur in the slap, indicating that the eyes are combined Not tight, the structure is not strong.

The table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on the move, you will slam, and when you shake it, it will be nailed and it will take a long time.

Square tables, tables, chairs and other legs should have four triangular clips to fix the function. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.

4. The veneer furniture is not strictly tight.

Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not.

Look at the light when you check it, otherwise you won't see it. The ash veneer veneer furniture is more susceptible to damage and can only be used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. Particleboard veneer furniture, the ground part must be edged, and the edge banding will absorb moisture, swell and damage. Generally, the corners of the veneer furniture are easy to be tilted up. When picking, you can use your hand to rub the corners. If you get up, you will have problems with the glue.

5. Is the furniture edge flat?

The edge is not flat, indicating that the inner material is wet, and the seal will fall off in a few days. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The furniture inlaid with the plywood is nailed with nails. It is necessary to pay attention to whether the nails are flat and whether the color of the nails is consistent with other places. Usually the nails are sealed with putty. Pay attention to whether the putty is bulging. If it is bulging, it will not work. Slowly, the putty will fall out from the inside.

6. Mirror furniture should take a photo

Choose furniture with mirrors, such as dressing table, mirror, and dressing mirror. Take care of it and see if the mirror is deformed. Check if there is lining paper and backboard at the mercury in the back of the mirror. Qualified, no paper, no, otherwise the mercury will be worn away.

7. The paint part should be smooth

The paint part of the furniture should be smooth and flat, not wrinkled, flawless, etc. The corners are not straight at right angles, and the straight edges are prone to slag and paint. The door of the furniture should also be painted with a lacquer. The lacquered board is not easy to bend and is not beautiful.

8. Is the fitting installation reasonable?

Check the door lock switch is not working; the big cabinet should be equipped with 3 hidden hinges, and some can only be installed with 2; the upper 3 silks, some cut corners, only one screw, will be used.

9. Sofa, soft bed should sit

When picking up sofas and soft beds, you should pay attention to the surface to be flat, but not high and low; soft and hard to be even, but not hard, that piece of soft; moderate hardness, neither too hard nor too soft.

The method of selection is to sit down and squat with your hand, the flatness is not flat, and the spring does not ring. If the spring laying is unreasonable, causing the spring to bite the spring, it will make a sound. Secondly, it should also pay attention to whether the quilting has broken wires or jumpers, and whether the density of the corner teeth is reasonable.

10. Color should be coordinated with interior decoration

Although the white furniture is beautiful, it is easy to turn yellow when it is long, and the black is easy to gray. Don't be beautiful at the time. At the end, it is not white, black is not black. In general, furniture that resembles mahogany is not easily discolored.

Environmental Industry Roll Forming Line

Metal Rolling,Roll Forming Machine With Industrial,Environmental Industry Roll Forming Machine,Environmental Industry Roll Forming Line

Xinxiang Tianfeng Machinery Manufacture Co., Ltd. , http://www.frollforming.de

This entry was posted in on