Solutions to common problems in feed mill granules

Computers are very common in life, so when the wrong operation occurs, our computer will make a sound and tell us that our operation is wrong. The mechanical granule machine is not like this. The internal sound appears. It is not to remind you which operation has a problem, but to tell you that the granule machine is going to be broken. Let us look at the problem of the granule machine to solve it today. XWn China Feed Industry Information Network - based on feed, serving animal husbandry

1, the problem often occurs in the feed pellet machine is the bearing damage, this phenomenon is often caused by excessive operation, and the speed of running too fast will also cause this problem, so we recommend that it must be reasonable when using Use, the precursor of the feed pellet machine before the failure is the sound, we have to be more slippery bearing immediately, and if the bearing damage is very obvious, we will obviously feel that the feed pellet machine itself has a big There are many parts that are shaking or have stopped rotating. These are all indications that the bearing is defective. XWn China Feed Industry Information Network - based on feed, serving animal husbandry

2, some parts of the feed pellet machine have problems, or loose, these will cause the machine itself to make a sound, some parts appear loose, he will not affect our normal work, and there are many screws will appear The sound, but it will not affect our normal work, so there are many problems that we have neglected to cause future damage, so if we find that the parts are loose, we must even deal with them. There are many parts that have problems that will not only affect us. The work will even affect our personal safety, so we must pay attention to it. If we find that the outlet has the screw falling out, we have to find the part that has fallen off the screw and then screw it on again. This is working for us. A serious test. XWn China Feed Industry Information Network - based on feed, serving animal husbandry

3, there is a particle machine inside, may be caused by their own operation, it may be that when we put in the law to let the particles into the body cavity, this phenomenon is more common, the processing method is also very simple, It is to stop the power-off cleaning, this should also be careful, because the click will generate a lot of static electricity under normal motion, and these static electricity are attached to the mechanical body, we must handle static electricity during operation, open the outer casing of the machine itself, then Clearly, this method is the simplest and most common. XWn China Feed Industry Information Network - based on feed, serving animal husbandry

So we need to know how to find the latest problems in feed machinery and find problems early to solve them. Don't wait until the feed machinery is broken, and then think about solving the problem. At that time, it will only be the money. XWn China Feed Industry Information Network - based on feed, serving animal husbandry

Whether it is classic or contemporary, polyurethane decorative Carved Cornice Mouldings encompass a great selection of period correct designs, patterns and sizes for a wide variety of applications. Our decorative Carved Corner Mouldings are used to decorate a ceiling in many creative ways adding an architectural focal point to any room with style and beauty. Our Carved Cornice Mouldings are individually molded showing extreme care for its crisp lines which provides an elegant detail. They are light weight, strong and easy to install using standard woodworking tools. Our Carved Cornice Mouldings are factory primed and ready to be painted with any high quality paint.

Pu Decorative Mouldings,PU Cornices, Crown Molding,Carved Cornice Mouldings,Cornice Corner Mouldings, which are available in numerous designs to suit all tastes and styles and ensure a beautiful transition from wall to ceiling.

We have Carved Cornice Mouldings about 150 different designs, big size of Carved Cornice Mouldings are widely use to decoratie on the ceiling of big and high rooms, we develop new Carved Cornice Mouldings every year, our Carved Cornice Mouldings may be satified with all of your requirements.

Main characters of Cornice Mouldings

1. Low cost: the surface painting is finished and installation time is very short, can be planed, sawed, nailed and glued by yourself, 80% cost saved than using wood and concrete.
2. Light weight: good resilience and tenacity, light and hard.
3. Entirely: classic, elegant and uniform.
4. Fire-proof: reach the standard of no combustion, uncombustion supporting and unburning.
5. Water-proof: no moisture absorbing, water permeation and mildew arising.
6. Anti-erosion: resist acid and alkali.
7. Environment protection: using polyester as raw material to avoid lumbering

Sites suitable: House, Restaurant, Hotel, Salon, Club, Shop etc.

PU Cornices, panel Mouldings

Carved Cornice Mouldings

Carved Cornice Mouldings,Cornice Mouldings,Crown Mouldings,Polyurethane Carved Cornice Mouldings,Pu Cornice,Foam Crown Mouldings,Decorative Cornice Mouldings

Suntronic New Materials Technology Co., Ltd. ,

This entry was posted in on