Problems and maintenance during the use of furniture
I. Temperature effects
The temperature is between 18 and 24 degrees Celsius and the relative humidity is between 35% and 40%. It is the ideal environment for wooden furniture.
Avoid placing the furniture near a heat source or air conditioning vent. Dramatic changes in temperature can cause damage to any exposed parts of the furniture, and the use of humidifiers, fireplaces or small heaters can also cause premature aging of the furniture.
Second, the impact of expansion
In a humid environment, the front of the solid wood drawer becomes difficult to open and close due to expansion. Although we have designed room for normal expansion, the harsh environment may still cause the drawer to expand and make it difficult to open and close. A simple solution is to apply wax or paraffin on the edge of the drawer and the bottom slide. If the humidity continues to be high for a long time, consider using a dehumidifier. When the air gets dry, the drawers are naturally open and closed. The joints of the furniture may cause fine cracks due to the expansion and contraction of the wood. Please be assured that the cracks will not affect the strength of the furniture, because at the joints, we use the interpolated round bar or æ¦«å¯ structure and special hardware to strengthen.
Light effects
Do not leave the furniture exposed to direct sunlight for a long time. When exposed to light, ultraviolet rays can cause fine cracks on the surface of the coating or cause fading and blackening. We recommend removing the furniture from direct sunlight and blocking the light through curtains when necessary. Please note that some wood types will naturally darken over time, and such changes are not quality defects.
Simple decoration and repair of furniture
Small areas of damage to wooden furniture can be repaired with appropriate materials and careful maintenance at some details. The small cracks at the angles can be used according to the color of the color-fixing crayon, which can be scraped with a blade and filled with a knife tip. White furniture can be made of transparent white wax.
1. Scratches and nicks
When the surface of the wooden furniture is slightly scratched, you can use the color pen to gently draw with the color pen at the scratch in the direction of the wood grain. Immediately wipe off excess colorant with a soft cotton cloth. The entire furniture surface is then wiped with a special furniture polish to further protect the coating. If scratches or dents penetrate the surface too deeply, consult a furniture repair specialist.
2, water marks
Water marks usually take a while to disappear. If it has not faded after one month. Please wipe with a clean white cotton soft cloth coated with a small amount of salad oil or mayonnaise in the direction of wood.
3, hot marks
Use a dry, ultra-fine furniture to coat the special steel wool pad directly in the direction of the wood grain. You can also use salad oil or mayonnaise to apply it to the hot mark, gently wipe it in the direction of the wood grain, and then use a piece. Wipe it off with a clean soft cloth and finally glaze.
Tip: High-quality furniture coated steel wool can be bought in building hardware stores. Remember: Please do not use the steel ball of the pot or pot instead of the steel wool for the furniture. Note: All of the above are recommended for furniture modification and repair. The results of using this method for each piece of furniture may vary. It is best to experiment in the secret place of the furniture. To make sure it doesn't damage the finishing of your furniture.
V. Maintaining the level of furniture
The doors and drawers of the furniture sold adjacent to the furniture have been adjusted to the horizontal level at the factory. You should place the furniture in a relatively horizontal position in your home, and the doors and drawers of the furniture can be opened and closed smoothly.
If necessary, our delivery staff will adjust the nails according to the specific circumstances in your home when you place new furniture. In addition, when laying carpets, moving furniture, or heavy objects such as TVs and computers in your home or furniture, you should adjust the height of the nails in time to keep the furniture level. Otherwise, the weight of the items you place may be different, and the four corners of the furniture will be subjected to different forces, resulting in a door or drawer closure that is not ideal.
Gabion wire mesh,High Quality Gabion wire mesh,Gabion wire mesh Details
Hebei Giant Metal Technology Co., Ltd. , http://www.358fencing.com