**Pump Bearing Protection**
Home > Bearing Knowledge > Pump Bearing Protection
Source: China Bearing Network | Time: July 1, 2014
---
Proper maintenance of pump bearings is essential to ensure smooth operation and extend the life of the equipment. Here are some key tips for maintaining water pump bearings effectively:
1. **Initial Use and Lubrication**: For a newly used water pump, it's recommended to replace the grease or oil after 100 hours of operation. After that, the lubricant should be changed every 500 hours to maintain optimal performance.
2. **Grease Selection and Application**: Use high-quality lubricating grease suitable for the bearing type. After running for 1500 hours, the grease should be replaced. Be careful with the amount—too much or too little can cause overheating. The bearing chamber should be filled to about 1/2 to 2/3 of its capacity.
3. **Lubrication Orientation**: When adding lubricant, follow the manufacturer’s guidelines on the direction and method. Proper orientation ensures even distribution and better protection.
4. **Storage of Lubricants**: Always store lubricants in clean, sealed containers to prevent contamination from dust, metal shavings, or moisture. Contaminated lubricants can significantly reduce bearing life.
5. **Lubricant Type Considerations**: Sodium-based grease is commonly used for motor bearings due to its heat resistance (up to 125°C). However, it is not suitable for water pump bearings because it dissolves easily in water, which can damage the bearing over time.
---
**Related Bearing Knowledge**
- Analysis of Rolling Bearing Damage
- Common Faults in Sliding Bearings
- Methods for Fixing the Inner Ring of Bearings
- Installation Techniques for Rolling Bearings – Heating Method
This article was originally published on [China Bearing Network](http://www.chinabearing.net). Please cite the source when sharing.
Previous: NSK Bearing Clearance Method
Next: How to Receive Technical Advice
---
By following these maintenance practices, you can significantly improve the efficiency and lifespan of your water pump bearings. Regular inspection and proper lubrication are key to preventing costly failures and downtime.
Lobe Pump In Chemical Fiber
Lobe pumps are widely used in different processing in chemical fiber industry, such as viscos, PVA, vinylon, acrylic slurry, ammonia slurry, polyester slice, terylene, polypropylene fiber, rayon, functional fiber and so on.
We are specialized in the production of rotor pumps and homogeneous pumps. The production capacity reaches 18000 units/year. Our pumps can transfer medium with viscosity up to 1,000,000cps, with a maximum flow rate of 400m3 / h (Capacity of 30L / R).
At present, we have 100,000 rotor pumps in operation around the world, have provided fluid transport equipment and technical services for thousands of enterprises. In this industry, we have many customers, such as Sateri, Lenzing, ADITYA Birla, Tangshan Sanyou and so on for many years, we have very mature experience.
Lobe Pump In Chemical Fiber; Rotor Pump In Chemical Fiber; Rotary Lobe Pumps In Chemical Fiber
NINGBO DURREX PUMPS CO.,LTD , https://www.durrexlobepump.com