Hydraulic pump is a hydraulic system of power components, its role is to convert the mechanical energy of the prime mover into liquid pressure energy, refers to the hydraulic system in the oil pump, which provides power to the entire hydraulic system. The structure of the hydraulic pump are generally gear pump, vane pump and piston pump. The causes of hydraulic pump noise and troubleshooting: 1) the pump filter is blocked by dirt can not play the role of oil filter: a clean cleaning oil filter to remove dirt. 2) The oil level is insufficient, the oil absorption position is too high, the oil suction pipe exposes the oil surface: refuel to the oil level and lower the oil absorption position. 3) There is no paper pad on both sides of the pump body and the pump cover; the pump body and the pump cover are not perpendicular to each other. Sealing air: air is sucked during the rotation: a paper pad is inserted between the pump body and the pump cover; Body and the pump cover vertical error of not more than 0.005mm, fastening pump body and the pump cover connection, there should be no leakage. 4) pump shaft and motor coupling is not the same heart, a distortion of friction: adjust the pump and motor coupling concentricity, so that the error does not exceed 0.2mm. 5) The meshing accuracy of pump gear is not enough: The gear meshing precision is reached on the grinding gear. 6) pump shaft seal skeleton off, the pump is not sealed: replace the pump shaft seal qualified. Output pressure: 70Mpa Power: 220VAC350W Maximum working pressure: 70Mpa200cc / min Minimum working pressure: 1.5Mpa20000cc / min Fuel consumption: 2.5L Machine weight: 14kg Machine size: 385x130x250 [1]