Are the kickers warmer than ordinary radiators and floor heating? why?
It is not only less energy-consuming than ordinary radiators and floor heating, but also much lower! 20-30% energy saving than ordinary radiators, 60-70% energy saving than water heating.
Silver House HVAC International has always been making unremitting efforts to protect our planet home. The kick foot warmer developed not only integrates heating and home decoration perfectly, but also is the fastest heating and most energy-saving heating method. This is because:
A. The material used for kicking the foot warmer is: 6063-T5 aluminum profile with extremely fast heat dissipation, which ensures the rapid transfer of heat from the water in the heating water channel to the interior;
B. The installation around the corner of the room along the corner, the total heat load configuration is very high, not only rapid heating, and the temperature field is very uniform. Each metre of kick heat is 195W, a room of more than 10 square meters. It is installed around the room and is equivalent to 210W of heat per square meter. It is 2-3 times that of common wall-mounted radiators.
C. Because of the large heat dissipation, the ideal temperature can be reached in a 60-degree low-temperature heating room. Compared with the conventional high-temperature heating of 70-85 degrees, the energy-saving is very significant.
D. The main method is radiant heating. Heat radiation is the fastest method of heat conduction. As long as the surface temperature of the kicker is warm, people can quickly feel warm in the room.
E, kicker foot warm water volume is very small, only 0.17L per meter, with a more than 100 square meters of apartment, for example, kicker warm installation about 50-70 meters, the system aluminum plastic pipe about 100 meters, in accordance with this calculation, The total water capacity of the entire heating system is only about 20L. For a gas boiler, this water can be heated very quickly, so it is very energy-efficient;
F. Because of the rapid temperature rise, intermittent heating can be performed. People can close the door when they go out and enter the door to open. The ideal temperature can be reached within a few minutes. This energy saving is self-evident.
As can be seen from the above, Inwarm kick warmer is the most energy-saving and perfect heating method among all heating methods.
Telephone consultation, QQ
It is not only less energy-consuming than ordinary radiators and floor heating, but also much lower! 20-30% energy saving than ordinary radiators, 60-70% energy saving than water heating.
Silver House HVAC International has always been making unremitting efforts to protect our planet home. The kick foot warmer developed not only integrates heating and home decoration perfectly, but also is the fastest heating and most energy-saving heating method. This is because:
A. The material used for kicking the foot warmer is: 6063-T5 aluminum profile with extremely fast heat dissipation, which ensures the rapid transfer of heat from the water in the heating water channel to the interior;
B. The installation around the corner of the room along the corner, the total heat load configuration is very high, not only rapid heating, and the temperature field is very uniform. Each metre of kick heat is 195W, a room of more than 10 square meters. It is installed around the room and is equivalent to 210W of heat per square meter. It is 2-3 times that of common wall-mounted radiators.
C. Because of the large heat dissipation, the ideal temperature can be reached in a 60-degree low-temperature heating room. Compared with the conventional high-temperature heating of 70-85 degrees, the energy-saving is very significant.
D. The main method is radiant heating. Heat radiation is the fastest method of heat conduction. As long as the surface temperature of the kicker is warm, people can quickly feel warm in the room.
E, kicker foot warm water volume is very small, only 0.17L per meter, with a more than 100 square meters of apartment, for example, kicker warm installation about 50-70 meters, the system aluminum plastic pipe about 100 meters, in accordance with this calculation, The total water capacity of the entire heating system is only about 20L. For a gas boiler, this water can be heated very quickly, so it is very energy-efficient;
F. Because of the rapid temperature rise, intermittent heating can be performed. People can close the door when they go out and enter the door to open. The ideal temperature can be reached within a few minutes. This energy saving is self-evident.
As can be seen from the above, Inwarm kick warmer is the most energy-saving and perfect heating method among all heating methods.
Telephone consultation, QQ
Isolation Clothing,Sterile Protective Clothing,Plastic Protective Clothing,Cheap Protective Clothing
GUANGZHOU HTD INTERNATIONAL , https://www.maskhtd.com