There are some factories on the factory humidity have certain requirements, if too wet, then not only have an impact on the operating efficiency, the damage to the machine is also very large. So this time we need to use the dehumidifier. Xiao Bian and everyone introduced high temperature heat pump dehumidifier, and its working principle and characteristics of what is it? High-temperature heat pump dehumidifier High-temperature heat pump dehumidifier works High-temperature heat pump dehumidifier can make use of outside air as a heat source, the principle is the same as the air conditioner, dry air in the drying chamber and heat pump dryer between the closed loop, which uses heat pump dryer refrigeration system When the humid air flows through the heat pump evaporator, the internal low-pressure refrigerant absorbs the heat of the air from the liquid state to the gaseous state, and the air discharges most of the condensed water therein due to the cooling. The low pressure refrigeration steam from the evaporator is boosted by the compressor and sent to the condenser. When the dehumidified dry cold air flows through the condenser, the internal high pressure refrigerant releases heat due to condensation and the external air is heated to hot air Back to the drying room to continue drying, high pressure refrigerant liquid from the condenser bucked by the expansion valve and flowed into the evaporator to continue the next cycle. High-temperature heat pump dehumidifier Features 1. High-temperature heat pump dehumidifier to adjust the high temperature High-temperature heat pump dehumidifier through the operation mode switch to adjust the cooling capacity, heating capacity and dehumidification capacity, in each operating mode, you can also adjust the outdoor heat exchanger fan Speed ​​(air-cooled heat exchanger) and pump speed (water-cooled heat exchanger) to adjust the heat distribution between the outdoor heat exchanger and the indoor heat exchanger, the system cooling capacity or heating fine-tuning to increase the temperature Humidity adjustment accuracy. 2. High temperature heat pump dehumidifier wide range of applications As the high temperature heat pump dehumidifier has a variety of operating modes, to achieve a wider range of cooling / heating / dehumidification adjustment range, outdoor heat exchangers can be used in the form of air or water cooling, Used in different regions to meet the requirements of running cold / hot / wet loads throughout the year to achieve control of air temperature and humidity. As the high temperature heat pump dehumidifier with a variety of different modes of operation, from cooling dehumidification to heating operation, improve the system cooling, heating, dehumidification adjustment range, to meet the needs of different cold / hot / wet load. 3. Automatic control of high temperature heat pump dehumidifier According to the indoor temperature and humidity design requirements, real-time detection of indoor temperature and humidity, outdoor temperature and system operating conditions, according to indoor temperature and humidity changes and outdoor temperature conditions, automatic conversion system operating mode to Ensure the indoor temperature and humidity requirements and system safe operation. High temperature heat pump dehumidifier with cooling dehumidification, temperature dehumidification, heating dehumidification, heating, automatic defrost and other operating modes. And outdoor heat exchangers can also use different forms of air-cooled and water-cooled. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter: 2355962924) http://beng.liuti.cn/ (Hotline : 400-6030-811)