First, the daily maintenance of the heat exchanger
Daily operation should pay special attention to prevent fluctuations in temperature and pressure. First, ensure that the pressure is stable and never allow overpressure operation.
Second, the heat exchanger cleaning
After long-term operation of the heat exchange equipment, due to corrosion, erosion, fouling, coking, etc. of the medium, the inner and outer surfaces of the pipe have different degrees of scale and even blockage. Therefore, thorough cleaning must be carried out during maintenance and repair. Common cleaning (sweeping) methods include wind sweeping, water washing, steam sweeping, chemical washing and mechanical cleaning.
However, this traditional cleaning method such as mechanical methods (scraping, brushing), high-pressure water, chemical cleaning (pickling), etc., has many problems when cleaning the equipment: it is impossible to completely remove deposits such as scale, and the acid solution causes corrosion of the equipment. Vulnerabilities, residual acid cause secondary or scale corrosion on the material, which eventually leads to the replacement of equipment. In addition, the cleaning waste liquid is toxic and requires a large amount of funds for wastewater treatment. However, the use of high-efficiency, environmentally friendly, safe, non-corrosive, biodegradable Fushitek environmental cleaning agent not only has good cleaning effect but also no corrosion to the equipment, which can ensure the long-term use of the condenser.
Concerned about surprises
Label: use and maintenance of heat exchange equipment
Previous: Separate box type resistance furnace installation, use and maintenance Next: Common methods of chemical instrumentation anti-corrosion in petrochemical industry
Our product series of 304 stainless steel fasteners of Hongchuang Hardware includes 304 stainless steel Bolts, hexagon head bolts, hexagon head Screws, round head square neck bolts, full thread and half thread hexagon socket head cap screws, hexagon wood screws, hexagon socket head screws, hexagon socket head flange screws, full thread and half thread hexagon socket countersunk head screws, and we provide products conforming to DIN, ANSI, and JIS standards.
Property Class :
For Bolts & Screws: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H
Stainless Steel Bolts,Stainless U Bolts,Ss Bolts,Ss U Bolts
Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com