Degao Waterproof generally refers to the series of waterproof products of Degao Building Materials. This series of products has a flexible anti-deformation ability, can form a complete seamless waterproof membrane on the ground to prevent the occurrence of leakage. So how is Degussa waterproofing constructed? What are the characteristics of German high waterproof? The following and Xiaobian together to find out about it!
German high waterproof features
1. It is very environmentally friendly and has no toxic ingredients. It can be used in the waterproof work of fish ponds and drinking pools.
2. It is an inorganic material, and the cement base surface is also an inorganic material. Therefore, it is used on the cement base surface. It can integrate well with the cement base surface and become one with the other.
3, weather resistance is particularly good, it will not have a major impact on it throughout the year.
4, the service life is very long, do not worry about problems within a short time.
5, use it is very low overall cost and construction operations is very simple.
German high waterproof construction method
First, the grassroots processing
1. The first step to enter the field is to see whether the grass-roots level is solid, whether there is empty drum, wall surface, whether the ground is smooth, and whether there is any sanding.
2, grassroots leveling, see the scene there are no holes, trachoma, uneven (humps) and other phenomena; if so, you must use German high water does not leak repair, leveling; after treatment, must maintain the grassroots level, clean, No dust, grease, shedding, release agents and other debris debris.
3, then strengthen the treatment of corners, thresholds, door covers, pipe mouth, and toilet. The wire is brushed with a wire brush around the mouth of the pipe and then reinforced with a sealing agent. The sharp corner should be removed and wiped into an arc of 45°. The inside corner should be made into an arc chamfer of >30mm.
4. Fully wet the ground and wall with clean water. Keeping the base surface moist can not only help Degussa waterproof slurry fully penetrate into the base material, but also make the construction operation easier and faster. If the base surface has clear water, it must be used. Wipe dry.
Second, brushing conservation
1, according to the proportion, in order to add additives → powder into the container, while stirring with a stirring drill, fully stirred to precipitate-free latex (without powder group). After mixing for 5-10 minutes, stir and use again. During the operation, intermittent stirring should be maintained to prevent sedimentation. (Degussa general-purpose waterproof slurry and flexible waterproof slurry have the same stirring method. To ensure that no material is wasted, please mix according to the actual amount, and the mixed slurry must be used within the specified time to ensure construction quality, otherwise Solidified);
2, in the wall (usually full walls, especially the shower), the ground, with the German high general waterproof slurry brushing, we must cross brush 2 (2nd in the first After the beginning of the road, it can be carried out);
3. Chamfering and repairing the corners of the corners. It is recommended to apply 2 high-performance waterproof pastes to the corners of the corners, and then apply 1 high morality-flexible waterproof paste. (Special parts) Next, pave the non-woven fabric to strengthen, the wall surface to maintain each 5cm paving, the total width of 10cm, paving requires smooth and tight, can not have empty drum phenomenon; re-brushing 2 high moral flexibility K11 waterproof slurry until all covered with non-woven fabric;
4ã€Hemstone stone is first cross-brushed with Degussa general-purpose waterproof slurry (after the 2nd pass can be carried out after the initial coagulation in the 1st pass), and then brushed with 2 moral high-flexibility waterproof paste (this part is waterproof Construction is particularly important);
5, then brushing the German high-flexibility waterproof slurry, to strengthen the treatment of the mouth of the pipeline, such as the toilet, the same brushing 2 (No. 2 can be carried out after the initial condensation in the first lane);
6, 6-8 hours after the completion of all waterproof construction, water conservation shall be done once. After 6 hours of maintenance, spray water again for the second time to ensure that the Degussa waterproofing factor penetrates into the cement base.
Third, acceptance tiling
1, after completion, 48 hours, you can close the water test for 24-48 hours;
2. If the test water does not seep water, it will be qualified and paste the tiles. (This waterproof material has the function of penetrating crystallization, so it is very good for tiling. Note that it is best to use cardboard boxes or cardboard to pave the ground in order Protect the new waterproof layer to prevent wall tiles and tools from breaking through the waterproof layer).
The above is a brief introduction for Xiaobian. If you want to know more related information, please continue to pay attention to Qijia Consulting. More exciting consultation, please stay tuned.
Window sill waterproof bathroom waterproof standard membrane wall waterproof building waterproof building waterproof
Nitric Acid Plant,Nitric Acid Hno3,Uses Of Nitric Acid,Industrial Grade Nitric Acid
Shijiazhuang Xinlongwei Chemical Co., Ltd. , https://www.xinlongwei-chem.com