1. Control of initial water. The wet fly ash water that has just been discharged from the power plant is generally around 45%. At this time, drying immediately, the production cost is large, and the equipment also poses a great pressure. Stack in a well ventilated place for about 15 days, so that the water is reduced to about 20%, and then treated.
2. Selection of dust collector. Because the fly ash particles are fine and light in density, they are easily taken away by the airflow under the condition of negative pressure after drying, resulting in a change of the fluid medium, and the dusty gas has a large water content.
3, dry material conveying equipment should pay attention to sealing.
4, the choice of hot stove. The hot blast stove should be selected to have high efficiency, can fully burn low quality coal, and is easy to operate.
Concerned about surprises
Label: Problems needing attention in fly ash dryer system
Previous: Common faults of air compressors Next: Precautions for correctly installing solenoid valves and solenoid valves
Formula: CH3CHOHCOOH Molecular weight: 90.08 Performance:It is colorless transparent viscidity liquid, mild acid, guide wetly; the aqueous solution shows the acid reaction. It can be mixed with water, ethanol or ether wantonly, but not dissolved in chloroform. Specification:80%, 88% Packing:25kg drums, 250kg drums, IBC plastic drums. Main use: This product has characteristics, such as hot stability natural purely with soft and certain tart flavor,etc. Widely used in the food,pharmaceutical,electroless plating industries,etc.
Lactic Acid,98% Lactic Acid,Lactic Acid 85%,Lactic Acid Of Purity 80%
Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com