Titanium grade 5 (ERTi-5) alloy is commonly referred to as 6Al-4V titanium and is probably the most widely used titanium alloy. Its high strength, ability to be heat treated, weldability, excellent fatigue strength, and hardness make this alloy excellent for aerospace and industrial applications.Weldability is good and it can be heat treated to a higher strength  or toughness,Corrosion resistance is comparable to the ERTi-2.  It can be welded by the STAW, GMAW and plasma arc processes
· STANDARD of Grade 5 Titanium Wire
 AWS A5.16; ASTM B863; AMS 4951; AMS 4954; AMS 4956,etc.
· SPECIFICATION
 Starting from dia0.80mm to dia4.0mm.
· SURFACE of Grade 5 Titanium Wire
  Pickled , bright
· CHEMICAL COMPOSITIONS
 C 0.05       O 0.12 - 0.20       N 0.030      H 0.015        Fe 0.22       Al5.5-6.7       V3.5-4.5         Ti rem.
· APPLICATIONS
Titanium Grade 5 is typically used for for industrial fans, pressure vessels, aircraft components, compressor blades, and automotive and jet engine parts,and also used for welding, gas-tungsten-arc-welding (GTAW), gas-metal-arc-welding (GMAW) and plasma-arc-welding (PAW)
· TYPICAL MECHANICAL PROPERTIES of Grade 5 Titanium Wire
  Tensile strength: 895 MPa (130,000 psi)
    Yield strength: 830 MPa (120,000 psi)
    Elongation: 10 %
    Hardness: 300·340 HvÂ
· QUALITY & TESTÂ
   Strict test to ensure our quality,The third Party Inspection acceptable,EN 10204 3.1 is available
    (Quality Certification ISO9001-2008)
· PACKAGING:
   Straight Lengths:18", 24", 36" and custom
   Spool: 12" diameter standard spool
   Coil: by meter or kgs
   Flag Tagging Available
· CLASSIFICAZIONE of Grade 5 Titanium Wire
AWS A5.16Â Â Â Â ERTI-5Â Â Â Â AMS4854Â Â Â UNS R52400
Titanium grade 5 (ERTi-5) alloy is commonly referred to as 6Al-4V titanium and is probably the most widely used titanium alloy. Its high strength, ability to be heat treated, weldability, excellent fatigue strength, and hardness make this alloy excellent for aerospace and industrial applications.Weldability is good and it can be heat treated to a higher strength  or toughness,Corrosion resistance is comparable to the ERTi-2.  It can be welded by the STAW, GMAW and plasma arc processes
· STANDARD of Grade 5 Titanium Wire
 AWS A5.16; ASTM B863; AMS 4951; AMS 4954; AMS 4956,etc.
· SPECIFICATION
 Starting from dia0.80mm to dia4.0mm.
· SURFACE of Grade 5 Titanium Wire
  Pickled , bright
· CHEMICAL COMPOSITIONS
 C 0.05       O 0.12 - 0.20       N 0.030      H 0.015        Fe 0.22       Al5.5-6.7       V3.5-4.5         Ti rem.
· APPLICATIONS
Titanium Grade 5 is typically used for for industrial fans, pressure vessels, aircraft components, compressor blades, and automotive and jet engine parts,and also used for welding, gas-tungsten-arc-welding (GTAW), gas-metal-arc-welding (GMAW) and plasma-arc-welding (PAW)
· TYPICAL MECHANICAL PROPERTIES of Grade 5 Titanium Wire
  Tensile strength: 895 MPa (130,000 psi)
    Yield strength: 830 MPa (120,000 psi)
    Elongation: 10 %
    Hardness: 300·340 HvÂ
· QUALITY & TESTÂ
   Strict test to ensure our quality,The third Party Inspection acceptable,EN 10204 3.1 is available
    (Quality Certification ISO9001-2008)
· PACKAGING:
   Straight Lengths:18", 24", 36" and custom
   Spool: 12" diameter standard spool
   Coil: by meter or kgs
   Flag Tagging Available
· CLASSIFICAZIONE of Grade 5 Titanium Wire
AWS A5.16Â Â Â Â ERTI-5Â Â Â Â AMS4854Â Â Â UNS R52400
NSK manufacture a full range of deep groove ball bearings. These bearings are the most common type and are used in a wide variety of applications.
Single-Row Deep Groove Ball Bearings
Pressed Steel Cages
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread.
In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.
For big deep groove ball bearings, machined brass cages are used.
Machined cages are also used for high speed applications.
Extra Small Ball Bearings and Miniature Ball Bearings
Miniature and instrument ball bearings can be divided into two basic types, deep groove and angular contact. The first (deep groove) can be further divided into the following five classes depending on their design details:
Standard type
Flanged outer ring
Extended inner ring
Expanded type in which one ring has a radial thickness that is larger than normal compared with the bearing width.
Thin section type in which both rings are extra thin in the radial direction. They can also be classified as: open, shielded, or sealed.
Maximum-Type Ball Bearings
Maximum-Type ball Bearings contain a larger number of balls than normal deep groove ball bearings because of filling slots in the inner and outer rings. Because of their filling slots, they are not suitable for applications with high axial loads. types of bearings have boundary dimensions equal to those of single-row deep groove ball bearings of Series 6200 and 6300 respectively. Besides the open type, ZZ type shielded bearings are also available. When using these bearings, it is important for the filling slot in the outer ring to be outside of the loaded zone as much as possible. Their cages are pressed steel.
Shijiazhuang Longshu Bearing Co.,Ltd , https://www.longsbearing.com