Addressable Addressable Emergency Voice Communications System

Addressable Addressable Emergency Voice Communications System




1.Introduction:


The fire fighting telephone system is the special communication equipment for fire fighting, pursuant to the national standard Fire Linkage Control System.
This system is composed of the fire-fighting telephone host (hereinafter referred to as host), fire-fighting telephone extension(hereinafter referred to as extension) and fire-fighting telephone jack (hereinafter referred to as the jack), and is suitable for communication and dispatching in a fire or emergency in the building. In case of fire alarm in the application site, the site personnel can call the host through extension and contact the control center in time. The operator in the control center can also call the extension at the site through the host to know the situation on the site



2.Product features

1) With the two-bus technology, the power supply and communication are compatible on two buses, and are not divided into the positive and the negative, convenient for debugging.
2) It has perfect detection measures, which can detect the short circuit and open circuit of the bus, and make sound and light alarm.
3) The anti-interference performance of hardware and software allows for the adaptability to various complex environments.
4) The voice is subject to differential transmission on the bus, with strong anti-interference capability.
5) The application of silica gel button presents a beautiful appearance, good hand feeling and long service life.
6) The host and extension can call each other and make full-duplex call, and the host can communicate with three extension telephones at the same time.
7) It has the function of recording and displaying the calling and answering time, and can query 120 records of calling and response time between the host and the extension.
8) The recording is subject to circular coverage, first-in-first-out mode and automatic recording is enabled during a call.


3.Specification

1) Power supply:
Mains power: AC 220V (+10%, -15%, 50Hz)
Standby power supply: External DC24V
2) Bus current: ≤600mA
3) Frequency range: 300~3400Hz
4) Transmission attenuation: ≤5dB
5) Recording duration: more than 20min
6) Length of bus: ≤1,500m
7) Weight: ≤10kg
8) Dimensions: 406×331×174( mm)
9) Working environment: Temperature 0~+40ºC, RH ≤95%
10) Bus capacity: up to 99 code addresses (set by code switch in binary mode)
11) The host supports communication with at most 3 extensions simultaneously
12) Support up to query and playing 99 segments of recording
13) At most 120 call messages can be recorded
14) Line condition: extension loop resistance (exclusive of phone resistance) ≤ 300 Ω


4.Company introduction

Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory zhongshan, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.




5.Contact us

 
Mobile:0086 136-3251-2808
 



 

Silicone Tube Neon LED Strip

Silicone tube Neon Led Strip is the hottest product in the world.put the led strip inside milky Silicone tube.

With good waterproof performance. The milky white cover makes the led strips soft and even,

single color and RGB ,colorful and other colors are optional. An external external controller can achieve the effect.

IP68 waterproof can be used for outdoor decoration, often used for building decoration, Christmas decoration and other places.

The installation is simple and convenient, the repair is simple, and the scope of application is wide.

Neon Strip Lights,Neon Tube Light,Silicone Tube Neon LED Strip,DC24V Neon Tube Light

SHEN ZHEN SEL LIGHTING CO.,LTD , https://www.sel-lighting.com