Once upon a time, the induction cooker was popular because of its ease of use, but it was not long before, because the rumored radiation was too large, the induction cooker was abandoned by most people. Is the induction cooker radiation really big? Is it so harmful to our health?
The radiation frequency generated by the induction cooker is about 17% of the signal of the mobile phone, and the radiation power is relatively smaller than the signal of the mobile phone we usually use. Therefore, in terms of radiation intensity, the general induction cooker radiation is not very large.
However, the electromagnetic oven may have electromagnetic wave leakage problems. This leakage will greatly increase the amount of radiation in the induction cooker. After a long time, it will affect our health.
In addition, the radiation of the induction cooker may affect us within a certain range, but it will decrease as the distance increases. This distance is about 40cm. So if you don't want to be affected by the radiation from the induction cooker, it will be fine if you stand a little farther.
Of course, we must also remind everyone that the radiation harmful to the body is ionizing radiation. Relatively speaking, the electromagnetic radiation is much smaller, so everyone does not need to panic. As long as it is used correctly and purchases regular induction cooker products, it will basically not cause too much damage to the body. Great influence.
[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng cabinet network "; you can view the popular article " Cabinet: expensive, expensive, good and expensive " , want to communicate with peers can join the Jiuzheng building materials network cabinet exchange group]
The Traffic Safety Store Speed Bump and Speed Hump Buyers Guide
Benefits Rubber Speed Bumps and Speed Humps over traditional asphalt or concrete bumps are:
100% recycled material
Never need painting
Easy one person installation
Removable for snow plowing or pavement maintenance
Cost effective, years of high performance with low maintenance
When to use a Speed Hump instead of a Speed Bump?
Speed Bumps are designed to:
Improve pedestrian safety
Reinforce stop signs in parking lots
Reduce the risk of accidents on private residential streets, driveways and parking lots
Speed bumps are specifically made to slow drivers down to between 2 to 5 mph.
Speed Humps are designed to:
Slow traffic on public roads such as schools, hospitals, anywhere reduced vehicle speeds are desired
Be gentle enough so that emergency vehicles do not need to slow down
Industrial areas or areas with heavy truck traffic where high speeds can lead to an overturned vehicle
Speed humps are specifically designed to slow vehicles to between 10 to 15 mph.
Rubber Speed Breakers,Rubber Speed Bumps,Portable Speed Bumps,Rubber Speed Humps
Renqiu Xingcheng Rubber Products Co., Ltd. , https://www.rubbermats.nl