[ Pacific Security News ] The fierce competition in the infrared camera market has not promoted the development of the entire market. On the contrary, some product problems that have been solved have often appeared. So, what is the reason that the infrared camera is currently shrinking? Mainly from the following points. 1. The flood of hand workshops has caused the overall market price to fall and chaos. The overall decline in product quality is due to the low production threshold of infrared cameras, and there are quite a few merchants on the market specializing in the production and sale of camera accessories. This is the growth of hand workshops. Opening up a fertile ground, so three or two people rented a small room to start production, and their ultimate goal is to pursue profit maximization, obviously, quality has become empty talk. Due to its low price, it has caused impact on some regular manufacturers, which has gradually reduced the market share of regular manufacturers. Under the pressure of competition, in order to keep the market, some regular manufacturers can only reduce costs. Simultaneously, under the pressure of manufacturers, all raw material suppliers can only shrink the quality of materials. As a result, the overall quality of the products has declined. The quality problems that have not appeared or have been solved have begun to rise, and the whole market is in a feverish situation. The vicious price competition. Of course, the current situation is actually a necessity for market development. The security industry has only developed in China for only 20 years. The development of infrared cameras is less than 10 years. In such a short period of time, on the one hand, manufacturers are in a period of “hundred schools of contentionâ€, and there are not yet one or two leading enterprises. Occupy the dominant position of the industry and guide the entire industry. On the Other hand, many customers lack a correct understanding of infrared cameras, and because the technical threshold is too low, many small workshops are available, which leads to the current situation.
2, the product system is singular, product homogenization almost since 2006, there are few new varieties of infrared cameras, the products of various manufacturers, is still the product of 2006, if the products produced by different manufacturers are not labeled, single It is difficult to distinguish the difference between the two products from the appearance. In fact, during this time, some companies are updating their product lines, but a new product will take a long time from R&D to market, and the price of the infrared camera market is too large, resulting in a new product. In the past, the price will be hit by the price, and the new products developed in the past few years are mostly single-function, and there are no special highlights, which makes the promotion more difficult.
3. The imperfect industrial mechanism is also a reason for the slow development of the entire market. Since the beginning of the 1980s, the security industry started in China. So far, domestic camera manufacturers still do not have an industry standard to restrict it. Many manufacturers implement it. It is the corporate standard, and even some small manufacturers simply do not have standards. In such a chaotic state, it is almost empty talk to measure whether a camera is qualified. In addition, the testing standard is not sound enough. At present, the only authoritative organization for the quality inspection of infrared cameras in China is the product quality supervision, inspection and testing center of the Ministry of Public Security's security and alarm system. The standard of the center's detection camera is "GB/T15865-1995 camera ( PAL/SECAM/NTSC) Measurement Method, each test is only for the resolution, voltage resistance, brightness, signal-to-noise ratio and other parameters of the conventional camera. It does not involve the infrared camera and its infrared lamp power, emission distance, Testing of various related indicators such as night vision effects. In fact, it is not that the center does not test, but so far, there is not a standard for infrared cameras. It is based on this situation that some hand workshops will be produced with impunity to disrupt the market.
2, the product system is singular, product homogenization almost since 2006, there are few new varieties of infrared cameras, the products of various manufacturers, is still the product of 2006, if the products produced by different manufacturers are not labeled, single It is difficult to distinguish the difference between the two products from the appearance. In fact, during this time, some companies are updating their product lines, but a new product will take a long time from R&D to market, and the price of the infrared camera market is too large, resulting in a new product. In the past, the price will be hit by the price, and the new products developed in the past few years are mostly single-function, and there are no special highlights, which makes the promotion more difficult.
3. The imperfect industrial mechanism is also a reason for the slow development of the entire market. Since the beginning of the 1980s, the security industry started in China. So far, domestic camera manufacturers still do not have an industry standard to restrict it. Many manufacturers implement it. It is the corporate standard, and even some small manufacturers simply do not have standards. In such a chaotic state, it is almost empty talk to measure whether a camera is qualified. In addition, the testing standard is not sound enough. At present, the only authoritative organization for the quality inspection of infrared cameras in China is the product quality supervision, inspection and testing center of the Ministry of Public Security's security and alarm system. The standard of the center's detection camera is "GB/T15865-1995 camera ( PAL/SECAM/NTSC) Measurement Method, each test is only for the resolution, voltage resistance, brightness, signal-to-noise ratio and other parameters of the conventional camera. It does not involve the infrared camera and its infrared lamp power, emission distance, Testing of various related indicators such as night vision effects. In fact, it is not that the center does not test, but so far, there is not a standard for infrared cameras. It is based on this situation that some hand workshops will be produced with impunity to disrupt the market.
the third date is the height of the fence mm ,the
Farm Fence,Hot Dip Galvanized Wire,Farm Fence For Animals
Hebei Giant Metal Technology Co., Ltd. , https://www.wiremesh.pl