Wooden door knowledge: how to prevent insects

1. In order to prevent the wooden door from being eroded by mites, it can be applied several times with concentrated brine on the surface to prevent mites.

2. Take the camphor oil from the cotton, make the camphor cotton pill, place the piano, wooden furniture, wardrobe, and the flow table to remove the cockroaches and insects.

3. Use the appropriate amount of sharp pepper or pepper, mash into the end, stuff into the pupil, and use boiling water to inject, have the effect of killing insects, can prevent the spread of insects.

4. Mix thoroughly with fire water and trace insecticide water, and drip into the pupil to kill the mites. However, this method is not applicable to bamboo baskets for storing food such as baskets and cabinets.

5. Paint treatment for some corners that have not been damaged, with paint such as raw tung oil, shellac or varnish, brushed to the surface of the wooden cabinet, can make the mites and the air isolated, to achieve the purpose of anti-mite. Note that when painting, the front and back sides and the inner wall of the wooden cabinet should be evenly painted.

6. Chemical treatment When the wooden door is damaged by insects, it can be mixed with dichlorvos and water in a ratio of 1:5, and sprayed with a sprayer to allow the liquid to penetrate into the wooden cabinet. It should be sprayed 3 times to 5 times continuously. After 8 hours, all aphids can be killed. After that, wash the wooden door with water and dry it.

7. Wipe with a diesel lamp. Place the wooden door that has been wormed in the sun. Use a brush or cotton yarn to pump the wood cabinet all the way. After drying for two or three hours, apply it again and then expose it to the aphid. Then wash and dry with washing powder

8. After buying the wooden door, dip it with 3% sodium fluoride to prevent insects forever.

Note: This method can also be used for wooden furniture.

Plasma Cutting Machine not only can cut flat sheet , still also can cut on pipe . 

plasma Cutting Machine & drilling machine , can regarding hole diameter to choose cutting or drilling .

1. Pipe cutting :Square pipe &round pipe all can cut . pipe diameter and length can customized regarding customers ' demands.

2.Metal sheet cutting :different thickness need different power source , China HUAYUAN & USA Hypertherm is two popular model power source 

3. Drilling :if the hole diameter is too small , drilling function is better choose instead of plasma cutting .2mm-18mm is standard drilling diameter

OEM of Cnc Plasma Cutting Machine are Available 

Pipe & Sheet Cutting & Drilling Machine

Sheet Metal Fabrication,Metal Fabrication,Metal Cutter,Pipe Drilling Machine

Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnmetalcutting.com

This entry was posted in on