Coating coating integration is the future development trend of the coating industry
Painting integration refers to the integration of coating products and coating lines. At present, despite the rapid development of China's coatings industry, the problem of unbalanced development of coatings and coatings has gradually emerged, mainly due to the relative lag of painting. As the saying goes, "three-point paint and seven-point construction", paint can only be applied through painting, in order to show its rich decorative performance, as well as anti-corrosion, anti-fouling, anti-mildew and other protective properties. Coatings and coatings must work closely together and integrate. Http://
Although China's coatings industry started late but developed rapidly, in the tide of low-carbon, environmentally-friendly economic development, the coatings industry is developing toward water-based, and various innovative scientific research products are continuously introduced. However, the existence of many factors has led to inconsistent development of coatings and coatings. The coating technology and level lag behind the development of coatings, which has greatly restricted the development of the coatings industry. These factors mainly include the following aspects:
First of all, paint manufacturers and downstream companies lack good communication and docking. In the past, paint manufacturers only focused on the technical research and development of coating products to improve the performance of coating products, but they ignored the actual application effect, and did not understand the coating technology of coating products, let alone professional research; The downstream enterprises of coatings only pay attention to the improvement of coating technology, and do not fully grasp the performance of coating products, which leads to the coatings not being fully utilized in practical applications.
Secondly, coating equipment and technology are behind the limits of the application and development of coating products. Technology has always been the soft underbelly in the development of China's coatings industry, and it is also the bottleneck facing the development of coatings downstream industry. Coating innovation products are constantly being updated, but if the manufacturer and the user lack communication, it will lead to the lag of the corresponding coating equipment and technology development, coupled with the relatively high cost of coating equipment replacement and research and development, which will lead to coating Faced with the "cold market hot market" situation, hindering the development of both sides.
Again, the skills associated with the paint practitioner are missing. Painters want to be successful in their construction. When they are faced with a new thing and are not sure, the unsafe feeling of insecurity will put them under psychological pressure. Therefore, they prefer traditional construction methods. This has caused the problem of “difficult construction†of new coatings, which ultimately restricts the development of the coatings industry.
The imbalance between coatings and coatings not only limits the full performance of coating products, but also makes it difficult for downstream companies to produce high-quality products, which is detrimental to both sides. Facts have proved that the integration of coatings and coatings is an inevitable trend for upstream and downstream enterprises to become bigger and stronger. The integration of coating and coating not only enables coating companies to enhance their understanding and understanding of the coating process and equipment, but also promotes the understanding of coating performance by downstream companies, so that painters can “do their best†and paint products “ The material can be used to the fullest, to achieve the perfect combination of paint and coating.
In the development situation of rising raw material prices, logistics and cost increase, the integration of coating and coating helps to effectively control costs and achieve a win-win situation between the two parties: for coatings companies, coating coating integration helps coatings Production enterprises find problems in time, improve production technology, timely develop products suitable for market demand, reduce R&D costs and promote resistance; for coating downstream enterprises, paint coating integration can reduce product failure rate, reduce losses, and improve product quality. In addition, the integration of coatings and coatings helps companies to create distinctive, professional and personalized services and enhance their market competitiveness.
The integration of coating and painting is a systematic project that requires the cooperation of upstream and downstream enterprises.
First, coatings companies should “bundle†technology and applications. Paint production enterprises need to take practical application as the premise in the product development process, comprehensively consider the factors of material selection, construction, environment or equipment of downstream enterprises, bundle product technology with practical application, and formulate research and development priorities according to customer needs.
Second, downstream companies need to have good technology and equipment to ensure. Painting equipment is an important factor affecting the integration of coating and coating. The coating is a semi-finished product, and its full value can only be achieved by painting. The integration of coatings and coatings is a long-term development process, and its advancement needs to be gradual. Therefore, at this stage, the coating equipment does not need to be greatly improved or the enterprises with less difficulty should be the main promoters to achieve this goal. These enterprises should be based on the guarantee of good technology and equipment, and the paint manufacturer. Working together, from point to point, gradually promote the development of the integrated coating and coating system.
Once again, coatings and downstream companies need to work together to create a professional painting team. Paint companies need to understand the corresponding construction technology of the products in order to better train and guide the painters; and downstream enterprises must also build a professional and sophisticated construction team to hold coating knowledge training to help painters understand the paint. The basic performance, improve the basic skills of construction, and thus produce qualified, high-quality products.
The integration of coatings and coatings is a demand for market development and a powerful weapon for coating companies to remain invincible in the market competition. It is of great significance to promote the development of the entire coatings industry.
40W Glue Guns Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
9. New design
10. With switch function
11. Big power
12. Industrial use
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc.Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with many years of trouble-free, safe and reliable service.
General Safety Information:
1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;
2. wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;
3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;
4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;
If glue gun can not be heated, there are following reasons:
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;
If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.
5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle or melted glue;
7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.
8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it beyond any of Children palpable side;
10. Only used for melting glue stick, no other usage;
11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use after 15 minutes;
Using methods
1. Glue gun using voltage is 110-220V AC,50/60Hz;
2. Tip gun forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
tunnel at back of gun
4. After power, wait for 5-10 minutes to allow glue to soften
After glue softens, squeeze trigger to feed glue through glue barrel. Excessive force will damage glue gun. Put down nozzle after work, disconnect the power plugProfessional Glue Gun, 40W Glue Guns, Silicone Glue Gun, Hot Melt Glue Gun
Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com