As the national economy continues to rise, people's living standards have improved qualitatively, but while the quality of life has improved, it has also brought many drawbacks. As far as security is concerned, the current law and order is not as good as it used to be, so the security issue has become the focus of attention. The emergence of the security door successfully solved this problem. However, because the weight of the security door is too heavy, it can not meet the needs of people. Therefore, there is a door in the society that combines steel and wood, called indoor steel doors. Indoor steel doors are not as heavy and expensive as security doors, so they are favored by consumers. That is to say the installation process and precautions for indoor steel doors.
Indoor steel door installation process
A good indoor steel door must be installed very well, so that it can be said to be the best use. Therefore, the installation of indoor steel doors is also very important.
First of all, we must first measure the length and width of the indoor steel door with a tape measure, and dig according to this measurement data.
Second, install the door frame that has been properly installed.
Thirdly, everyone drilled with an electric drill on the upper, middle and lower sides of the door frame. Then, according to the height of the hole, the hole was drilled at the same height on the indoor steel door, and then the indoor steel door and the door frame were screwed together. .
Fourth, the door handle and the lock cylinder are installed in the middle of the other side of the indoor steel door. Finally, repeat the switch test on the installed indoor steel-wood doors, listen to whether the indoor steel-wood doors and the ground emit frictional sounds, or see if the indoor steel-wood doors are loose. If there is no such phenomenon, it means that the indoor steel door has been installed successfully.
Indoor steel door installation considerations
A good indoor steel door installation is not as simple as you think. There is a lot of need to successfully install an indoor steel door.
First, minimize the friction between the indoor steel doors and other tools during installation.
Secondly, when the indoor steel-wood door is connected with the door frame, the screws must be tightened to prevent the indoor steel-wood door from falling off in the future use. Finally, the most important thing is to maintain the indoor steel-wood door and the ground when installing the indoor steel-wood door. A certain distance to prevent friction from the ground and cause wear, thus affecting the service life of the indoor steel doors.
A good indoor steel door can bring convenience to everyone's life and work. So nowadays, indoor steel-wood doors have become an indispensable part of life. Whether it is a large bank, a shopping mall, a school or a home, there will be indoor steel doors, but everyone knows about the installation of indoor steel doors. Very few. In fact, the installation of indoor steel doors is also very important, so the installation process and precautions for the indoor steel doors introduced to you can help you when installing indoor steel doors.
Faucet Decorative Cover,Decorative Outdoor Water Spigot Cover,Water Spigot Handle,Outdoor Water Tap
WENZHOU HUAGUAN SANITARY WARE CO,.LTD , https://www.wzhuaguan.com