Tiles are an indispensable material in home renovations, but tiled flooring can be a technical activity. How can tiles be laid? Due to the variety of types, styles and specifications of tiles, the application space is also different, so the tile laying process is also not the same. Here we take a look at the tile paving process and the tile method .
Tile laying process
Tile laying process - floor tile laying process
Process: Grassroots processing→elastic line→pre-paving→paving→hooking→cleaning.
1. Primary treatment: Thoroughly clean the dust and sundries without hollowing, cracking and sanding.
2. Spring line: Elevation control lines are popped around the wall before construction, and crosshairs are popped out on the floor to control floor tile separation.
3, pre-shop: First of all, should be based on the design requirements of the drawings, on the floor tiles of the color, texture, surface formation and other strict selection, and then pre-shop according to the requirements of the drawings. The size, color and texture errors that may occur in the pre-paving are adjusted and exchanged until the best effect is achieved, and the paving is smoothly stacked and stored.
4, paving: laying a selection of 1:3 dry cement mortar, mortar thickness of about 25mm. Before the tile is applied, the back of the tile shall be wetted. Place the tiles on the cement mortar as required and tap the tile finish with a rubber mallet until the flatness is reached.
5, hooking: floor tiles 24h after finishing cleaning joints, joints before the cracks in the floor tiles should be wiped clean, with a special sealant jointing.
6, cleaning: home decoration tiles with the process of dry with the clear, after completion (usually should be in 24h) and then use cotton yarn and other objects on the surface of the tile management.
Tile Laying Process - Wall Laying Process
1. Inner wall tiles: The inner wall tiles are glazed ceramic tiles. Before the construction, the water should be soaked for more than two hours. After the wall tiles are soaked in water and dried in the shade, they can be paved. The wet construction method should be adopted. The cement mortar should be used 2: The ratio of 1 is to use white cement or special grout for jointing, and the gap between brick and brick should be small. Do not use pure-cement wall tiles. This can easily cause hollowing or cracking of the tiles.
2. External wall tiles: External wall tiles are mostly ceramic tiles, and generally do not use water soaking. We also use the wet plastering method 2:1 cement mortar construction technology. However, a small amount of 801 glue should be added to the cement mortar to increase the bonding strength. Generally, pure cement is used. Stitching, the gap between brick and brick requirements in the 8-10mm or so. When affixing a wall tile, the base should be fully wetted, the wall surface is marked horizontally, and the vertical calibration line should be hung. At the same time, the surface should be inspected for smoothness. The jointing process should be performed within 24 hours after the plastering.
3. High-grade wall tiles: In the process of laying high-grade wall tiles, the first step is to use 1:1 cement mortar for the grass-roots floor, coat the surface, and then use a special wall tile paste for paving. This construction method has a high cost and is generally Home decoration is not recommended.
Tile laying method
Dry shop method:
In theory, the floor tiles should be dry-laid, and the groundwater should be moistened to remove floating sand and debris. Wipe the bonding layer, use one to three dry cement mortar, lay flat according to the horizontal line, put the brick on the mortar and use the rubber-coated hammer to shake, remove the floor tile and pour the cement slurry, and then put the floor tile to make it level .
Wet shop method:
The difference with the dry shop method is to replace one to three dry cement mortars with ordinary water and cement mortar. The tiled floor using the wet paving method may generate hollow drums and air bubbles, which may affect the service life of the tile. However, due to the ease of operation and low price of the wet paving method, many families still use the wet paving method to lay the ground.
Tips: Wall tiles can only be wet-laid; floor tiles can be dry-laid and wet-laid, and floor tiles are generally dry-laid, but non-large tiles on the ground and places where thickness is required (sometimes directly affixed with plain ash) are recommended to use wet-laid. The dry-fabric method is mostly used in the living room and bedroom, while the wet-laid method is used in sanitary ware and kitchens, and is similar to the wall-paving method.
The dry paving method effectively avoids the occurrence of air bubbles, empty tiles, and other phenomena caused by the floor tiles in the paving process. However, because the dry paving method of the ground tiles is relatively labor-intensive and the technical content is relatively high, the general dry paving method is better than Wet paving is much more expensive.
Above about the tile laying process and the tile laying method is introduced here briefly, I hope to help you. For more information, please visit this website. Stay tuned.
Tiled tile
Mattress Felt,Waterproof Mattress Felt,Custom Mattress Felt,Light Weight Mattress Felt
Suzhou Surface Protective New Material Technology Co.,Ltd , https://www.surfaceprotective.com